Precautions of choosing labor protective gloves
Feb 24, 2023
Whether the choice of the labor glove is appropriate or not, the use is correct or not, are directly related to the health of the hand. For those with standards, protective gloves that meet the standards should be selected; For those that have not yet been established, you should go to professional manufacturers or stores to purchase appropriate protective gloves according to the protection requirements.
When choosing and using disposable gloves, note the following:
1. Select appropriate size gloves. Glove size should be appropriate, if the glove is too tight, limit blood flow, easy to cause fatigue, and uncomfortable; If too loose, use is not flexible, and easy to fall off.
2. There are many kinds of protective gloves, which should be selected according to their purpose. First of all, the object of protection should be clear, and then carefully selected, so as to avoid accidents.
3. The appearance of insulation protective gloves must be carefully checked before each use. In addition, air should be blown into the normal gloves and squeezed tightly at the cuff of the gloves to prevent air leakage. If the gloves are checked for air leakage, they can be used as sanitary gloves. If the insulation gloves are slightly damaged, they can still be used. However, cover the insulation gloves with a pair of yarn or leather gloves to ensure safety.
4. Do not contact with acids, alkalis, or oils for a long time when using natural rubber gloves. Do not puncture sharp objects. After use, clean and dry, sprinkle talcum powder inside and outside the gloves, properly keep, in the storage shall not be compressed, heat.
5. All rubber, latex, synthetic rubber gloves color must be uniform, gloves in addition to the palm of the requirements of the thick, other parts of the thickness should be similar, the surface should be smooth (for non-slip in the face of the palm made striped or granular stop slip pattern except). It is not allowed to have more than 1. 5mm bubbles exist in the face of the palm, allow a slight wrinkle but no cracks exist.
6. Insulation gloves should be selected in accordance with regulations, and also it should be retested voltage strength after one year of use, unqualified should not be used as insulation.