How to: Put on and Remove Safety Coverall

As the world becomes more aware of health and safety, the use of personal protective equipment (PPE) has become increasingly important in various industries. One of the most common types of PPE used is the safety coverall. It is designed to protect workers from hazardous materials, chemicals, and other harmful substances. However, for safety coveralls to be effective, they must be worn correctly. In this article, we will provide a step-by-step guide on how to put on and remove a safety coverall.

Putting on a safety coverall

1. Choose the Right Size

Before putting on your safety coverall, ensure that you have the right size. The coverall should fit you comfortably without being too tight or too loose. A coverall that is too tight may restrict your movements, while a coverall that is too loose may increase the risk of getting caught in machinery or equipment.

2. Put on Gloves and Footwear

Safety coveralls are usually worn over other PPE, such as gloves and footwear. Ensure that you wear the gloves and footwear before putting on the safety coverall.

3. Open the Coverall

Lay the safety coverall flat on the ground and ensure that it is unfolded completely. Ensure that the zipper is closed before opening the coverall.

4. Step into the Coverall

Step into the coverall legs first, just like a pair of pants. Ensure that your arms are outside the coverall as you pull the coverall up to your waist.

5. Wear the Hood

If the safety coverall comes with a hood, pull it over your head and adjust it to fit your head. Ensure that your chin is not exposed, and the hood does not obstruct your vision.

6. Zip up the Coverall

Ensure that the zipper is completely closed from top to bottom. If the coverall has a protective flap, ensure that it is covering the zipper.

7. Seal the Coverall

If the coverall has sealable cuffs, ensure that they are sealed tightly around your wrists. Similarly, if the coverall has boot covers, ensure that they are sealed tightly around your ankles.

Removing a safety coverall

1. Remove the Gloves and Footwear

Remove your gloves and footwear first before removing the safety coverall.

2. Unzip the Coverall

Unzip the coverall completely from top to bottom. If the coverall has a protective flap, open it to access the zipper.

3. Pull Down the Coverall

With your arms inside the coverall, pull it down to your waist, then pull it down to your ankles.

4. Wear gloves

If your coverall is already contaminated, you should wear gloves before removing it.

5. Remove the Hood

If the coverall has a hood, remove it carefully by pulling it back over your head.

6. Roll up the Coverall

Take the coverall by the inside, and fold it neatly without touching the contaminated outer surface.

7. Dispose of the Coverall

Dispose of the coverall according to the guidelines provided for the specific type of hazardous material that is being handled.

 

Wearing a safety coverall is an important aspect of personal protective equipment. When worn correctly, disposable clothing can help prevent injuries and illnesses in various industries. It is important to ensure that you wear the correct size and follow the steps outlined above for maximum protection. Always remember to dispose of the coverall properly to prevent contamination.